Kitchen cabinets cost about $100 to $1,200 or more per installed linear foot in 2026. For an average kitchen, that works out to roughly $4,500 to $15,000 for stock and semi-custom cabinets, and much more for custom work. Type, material, size, and installation set the final price.
This guide breaks down costs by cabinet type, installation, refacing, and budgeting.
How Much Do Kitchen Cabinets Cost on Average?
HomeGuide puts the cost of a full cabinet replacement at about $4,500 to $15,000 for an average kitchen. Cabinet makers and trade cost guides price the same work per linear foot, which is the length of cabinet run along your walls. A standard 10x10 kitchen has about 20 linear feet.
| Cabinet Type | Cost per Linear Foot (Installed) | 10x10 Kitchen (about 20 LF) |
|---|---|---|
| Stock | $100 - $400 | $2,000 - $8,000 |
| Semi-custom | $150 - $700 | $5,000 - $15,000 |
| Custom | $500 - $1,200+ | $12,000 - $50,000+ |
These are national averages. In Neosho, Joplin, Seneca, Granby, and nearby communities, final prices depend on the supplier, lead time, and installer. Always compare written, itemized quotes from local contractors.
How Much Do Kitchen Cabinets Cost by Type?
The cabinet grade is the biggest price lever. Moving up one grade roughly doubles the price per linear foot.
- Stock cabinets ($100 - $400 per LF): Pre-made in standard sizes and finishes. Boxes are often particleboard or MDF. They ship fastest, often in one to two weeks.
- Semi-custom cabinets ($150 - $700 per LF): Built from set lines with more size, door, and finish options. Plywood boxes are common. Lead times run about four to eight weeks. - Custom cabinets ($500 - $1,200+ per LF): Built to your exact room and design, often from solid wood or premium plywood. Lead times can reach eight to sixteen weeks, and luxury builds can pass $1,500 per linear foot.
Most homeowner remodels land in the semi-custom range because it balances price, quality, and choice.
How Much Does Kitchen Cabinet Installation Cost?
Installation is part of the installed price above, but you may also see it quoted alone. Labor-only pricing runs about $50 to $150 per linear foot, or $100 to $500 per cabinet. For a 20-foot kitchen, that is roughly $1,000 to $3,000.
Installation costs more when the job includes:
- Removing old cabinets, which averages about $500, or $15 to $20 per linear foot, according to Angi - Uneven walls, floors, or ceilings that need shimming and scribing - Islands, tall pantries, and corner cabinets - Moving plumbing, electrical, or gas lines
What Factors Affect the Cost of Kitchen Cabinets?
Kitchen Size and Cabinet Layout
More linear feet means a higher bill. Corners, islands, and tall cabinets add cost because they use more material and take longer to fit. A simple one-wall layout costs less than a U-shaped kitchen.
Cabinet Materials and Construction
Particleboard and MDF boxes cost the least. Plywood is stronger and handles moisture better. Solid wood costs the most. Dovetail drawers and full-extension slides also add to the price.
Door Styles and Finishes
Flat and Shaker doors are the most affordable. Raised-panel, glass-front, and detailed doors cost more. Painted and glazed finishes cost more than basic stain or laminate.
Hardware and Interior Accessories
Handles, soft-close hinges, and drawer slides can add hundreds of dollars. Pull-out trays, spice racks, and trash pull-outs add more. Some lines include basic hardware, and others charge separately.
Custom Features and Storage Solutions
Special sizes, built-in appliance panels, pantry pull-outs, and lazy Susans raise the price. Each custom feature adds design time and shop labor.
Installation Complexity
Older homes often have out-of-level walls and floors. Fixing these takes extra time. Crown molding, filler panels, and finished end panels also add labor.
Are Kitchen Cabinets Sold by the Linear Foot?
Yes. Most dealers and contractors quote cabinets by the linear foot, then add other items as separate lines.
How Linear-Foot Pricing Works
Measure the length of each cabinet run along the wall, then multiply by the price per foot. Many shops count base and wall cabinets on the same wall as one run, though some price them separately. Ask how your quote is measured. Example: 20 linear feet at $300 per foot equals $6,000.
What Is Included in a Linear-Foot Price?
The price usually covers boxes, doors, drawers, and sometimes basic hardware and installation. It often leaves out countertops, trim, delivery, demolition, and plumbing or electrical changes. Confirm each item in writing.
Why Cabinet Prices Vary by Material and Style
Two quotes at $300 and $150 per linear foot may describe different products. Box material, door construction, finish quality, and what is included all change the number. Compare line by line.
How Much Does It Cost to Replace Kitchen Cabinets?
Full replacement runs about $4,500 to $15,000 for an average kitchen, or $150 to $500 per linear foot installed. Add the extra costs below:
- Demolition and disposal: about $500 on average - Countertops: often replaced at the same time, because lifting cabinets can damage the old tops - Flooring and paint: new cabinets can expose unfinished floor and wall areas - Plumbing and electrical: needed if the sink, dishwasher, or outlets move
Budget more if you choose custom cabinets or change the layout.
Is Refacing Kitchen Cabinets Cheaper Than Replacing Them?
Often, yes. Angi reports that refacing costs about 30 to 50 percent of full replacement. Refacing keeps your existing boxes and replaces the doors and drawer fronts, then covers the frames with veneer. It only works when the boxes are sound, and the layout already suits you.
| Option | Typical Cost | Best When |
|---|---|---|
| Refinishing (paint or stain) | $1,500 - $5,000 | Doors are in good shape and you want a new color |
| Refacing | $4,300 - $9,980, or $150 - $450 per LF | Boxes are solid and you want new doors |
| Replacing | $4,500 - $15,000+ | You want a new layout or the boxes are damaged |
Refacing is not always cheaper than basic stock cabinets, so get a quote for both.
How Can You Reduce the Cost of New Kitchen Cabinets?
- Keep the layout. Moving plumbing and electrical adds labor. - Choose stock or semi-custom. Custom builds cost the most. - Pick simple doors. Flat and Shaker styles cost less than detailed designs.
- Use standard widths. Cabinets come in 3-inch steps, and filler strips cover small gaps. - Consider ready-to-assemble (RTA) cabinets. They cost less if you or your installer can assemble them. - Buy hardware separately. You may find handles for less than the cabinet maker charges. - Reface sound cabinets. This keeps your existing boxes. - Compare three itemized quotes. Line-by-line comparisons reveal what is and is not included.
How to Budget for Your Kitchen Cabinet Project
Work through these five steps to build a realistic number.
Measure Your Kitchen
Measure each wall where cabinets will go and add the lengths to get your linear feet. A 10x10 kitchen has about 20 linear feet, and a 10x12 kitchen has about 22 to 25.
Choose Your Cabinet Style
Pick the grade, material, door style, and finish. Multiply your linear feet by the per-foot range for that grade to get a starting estimate.
Estimate Installation Costs
Add labor if it is not in the cabinet price. Use $50 to $150 per linear foot as a labor-only guide, then replace it with your contractor's quote.
Account for Additional Work
Include demolition, countertops, backsplash, flooring, paint, hardware, lighting, and any plumbing or electrical changes.
Keep a Contingency Budget
Set aside 10 to 20 percent of the total for surprises such as water damage, wiring updates, or out-of-level walls found after demolition.
Final Thoughts
Kitchen cabinets usually cost $100 to $1,200 or more per installed linear foot, so the type you pick drives most of the budget. Stock cabinets keep costs low, semi-custom adds choice, and
custom fits unusual rooms. Measure your linear feet, add installation, demolition, and hardware, and keep a 10 to 20 percent reserve. If your boxes are in good shape, refacing may save money. Ask for an itemized written quote so you can compare offers fairly and plan your project with confidence.
How Much Do Kitchen Cabinets Cost On Average?
An average kitchen costs about $4,500 to $15,000 for new cabinets with installation. Custom cabinetry costs more.
How Much Do Kitchen Cabinets Cost Per Linear Foot?
Installed prices run $100 to $400 for stock, $150 to $700 for semi-custom, and $500 to $1,200 or more for custom.
How Much Do Cabinets Cost For A 10x10 Kitchen?
A 10x10 kitchen has about 20 linear feet. Expect roughly $2,000 to $8,000 for stock, $5,000 to $15,000 for semi-custom, and $12,000 or more for custom.
How Much Does Cabinet Installation Cost?
Labor alone runs about $50 to $150 per linear foot, or $100 to $500 per cabinet. Complex layouts cost more.
What Is The Cheapest Type Of Kitchen Cabinet?
Stock and ready-to-assemble cabinets cost the least. Particleboard or MDF boxes with simple doors keep prices low.
Is Refacing Cheaper Than Replacing Cabinets?
Usually. Angi says refacing costs about 30 to 50 percent of replacement. Compare quotes, because basic stock cabinets can cost about the same.
How Long Do New Kitchen Cabinets Take To Arrive?
Stock cabinets often ship in one to two weeks. Semi-custom takes about four to eight weeks, and custom can take eight to sixteen.
Do Cabinet Prices Include Countertops?
No. Countertops, backsplash, and often hardware and trim are separate costs.
How Can I Lower The Cost Of New Cabinets?
Keep the current layout, choose simple door styles, use standard sizes, and compare itemized quotes. Refacing sound cabinets also saves money.
Do Cabinet Prices Differ In Neosho And Nearby Areas?
Local quotes in Neosho, Joplin, Seneca, and Granby vary by supplier, lead time, and installer. National ranges give a starting point, so request written, itemized quotes.